EasyManuals Logo

HEK MS 3000 User Manual

HEK MS 3000
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
ASSEMBLY AND ANCHORING
6-12 MS 3000 9095-032A
6.6 Adjusting the platform width
The width of the platform can be adjusted
to the shape of the building. As standard
an extension of 1 metre is possible. In
addition, there is a possibility to position
the extension 46 cm lower. Adaptor tubes
must then be mounted at the height of
the motors and the mast.
In case work must carry out behind the
mast an anchor ramp must be mounted.
The planks used for adjusting
the platform must in every case
be secured in every direction.
The platform widening and the
mast anchors must not come
into contact when the platform
is raised and lowered.
A fence (height 1.10 m)
completely surrounding the
platform is compulsory. If the
distance between the platform
and the facade is 0,3 m - 0,5 m
a fence with a height of 0,7 m
can be used. If the distance
between the platform and the
facade is less than 0.3 metre a
fence is not compulsory but in
this case a kick board with a
height of 0,15m must be fitted.
The platform extension must be in
accordance with specification prEN1495.
The platform extension must be
fabricated from a non-slip, easily cleaned
material. The extension must be self
draining.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HEK MS 3000 and is the answer not in the manual?

HEK MS 3000 Specifications

General IconGeneral
BrandHEK
ModelMS 3000
CategoryConstruction Equipment
LanguageEnglish