OPERATION
7-1MS 3000 • 9095-032A
7. OPERATION
7.1 General
No person may stand under the
machine while it is in use.
Material may never extend
beyond the edges of the
platform. Items which can roll
must be properly secured. The
load may never be supported
against the fencing.
The maximum reaction force (for
instance caused by tools) of the
platform with regard to the
facade amounts 800 N.
When work stops for any reason,
the main switch must be secured
with the padlock.
During raising or descending no
person may stand on the
platform extensions.
7.2 Preparation
1. Before the mast climbing work
platform is used it must be visually
inspected (daily if it is used every
day) for:
- anchors
- presence of all security devices
- connection between mast
elements
- position of the masts
- any loose components
- ground supports and the quality of
the ground
- electrical connections