DISASSEMBLY AND TRANSPORT
8-1MS 3000 • 9095-032A
8. DISASSEMBLY AND TRANSPORT
Ensure that the maximum
loading allowed during assembly
is not exceeded.
In winds of strenghts above 12,5
m/s (6 Beaufort), the machine
may not be disassembled.
1. Remove the mast covers.
2. Disconnect the uppermost anchor.
3. Together with the disassembly of the
mast, the anchor tubes and the
anchors must be disassembled.
4. If a crane is available on the building
site, the mast can be more quickly
disassembled. As many as four mast
elements can be removed together
and lowered to the ground with the
crane. The mast elements can further
disassembled on the ground.
5. Repeat this procedure until the mast,
with the platform in its lowest
position, has been completely
disassembled.
6. Release the brakes and allow the
platform to descend onto the buffers
(A, Fig 8-1).
7. Disconnect the electrical supplies.
8. Raise the jacks and remove the
ground supports.
9. Remove the control box.
Fig.8-1 Brake lever platform
To Next Page
Loading...
Need help?
General