HERO MAESTRO - TREAD WEAR AND INSPECTION

Front : 90 X 100 - 53J
The imported tyre(s) if fitted without ISI
mark; are in compliance of BIS standard
and Central Motor Vehicle Rules 1989, as
declared by the Tyre manufacturer.
Cuts, splits, or cracks in the tyre.
Replace the tyre if you see fabric or cord.
Excessive tread wear.
The tyres that come on your scooter are
designed to match the performance
capabilities of your scooter and provide
the best combination of handling, braking,
durability and comfort.
Rear : 90 X 100 - 53J
Bumps or bulges in the side of the tyre
or treads. Replace the tyre if you find
any bumps or bulges.
Tyre Replacement
Look for:
NOTE
The recommended tyres for your scooter
are:
Minimum tread depth Front: 1.0 mm
Replace tyres immediately when the wear
indicator (1) appears on the tyre. The tread
limits are:
Tread Wear
Rear : 1.0 mm
Check the tread wear indicator for tyre
wear.
(1) Tyre wear indicator (2) Arrow mark
Unidirectional Tyres
Inspection
Ensure the arrow mark (2) on the tyre is in
the same direction as that of forward
rotation of the wheel, whenever the tyre is
removed and put back in case of puncture.
Whenever you inspect the tyre pressure,
you should always examine the tyre treads
and side walls for wear, damage, and
foreign objects:
23