HERO MAESTRO - Running in

3. Open the key shutter (page 29) and turn
the ignition switch (3) to "ON".
1. Pull the choke knob (1) out all the way
to fully ON position (A).
Cold Engine:
(3) Ignition Switch
3. When engine speed begins to pick
up, operate the choke knob to keep
fast idle.
2. Use starter switch:
With the throttle closed, press the
starter switch.
Use kick starter:
With the throttle closed, operate the
kick starter with a rapid and continuous
motion.
4. Continue warming up the engine until
it runs smoothly and responds to
the throttle, when the choke knob is
at OFF position (B).
B
A
(1) Choke knob
(A) Fully ON (B) Fully OFF
3. Start the engine.
Warm Engine:
1. Do not use the choke.
2. Rotate the throttle 1/8-1/4 turn.
During this period, avoid full-throttle
starts and rapid acceleration.
RUNNING-IN
Help assure your scooter's future
reliability and performance by paying
extra attention to how you ride during the
first 500 kms.
41
3
1