37
6. Remove the front cover and disconnect
the front turn signal lamp connector.
Installation:
Installation is in the reverse order of
removal.
2. Loosen the lock nut (2) until it will no
longer turn.
Installation:
Rear View Mirror
3. Loosen the rear view mirror (3) and
1. Install the rear view mirror until it will
no longer turn.
1. Pull the dust cover (1).
2. Loosen the rear view mirror
Removal:
approximately 2 turns.
remove it.
4. Tighten the lock nut.
3. Adjust the rear view mirror.
To open the right side rear view mirror the
threads are to be loosened in clockwise
direction and tightened in counter
clockwise direction.
NOTE:
2
3
(1) Dust cover (2) Lock nut
(3) Rear view mirror
1
To Next Page
Loading...
