1. Headlamp Switch
The switch (1) has three positions.
Right Handle Bar Controls
Position Action
"OFF"
Following are "ON"
Head Lamp
Following are "ON”
Position lamp
Tail / Stop lamp
Meter Light
" ", " " & " " marked by white dot.
The headlamp operates only when the
engine is running.
2. Starter Switch
When the starter switch is pressed, the
starter motor cranks the engine. See
(page 40) for the starting procedure.
The starter switch (2) is next to the
throttle grip.
(1) Headlamp switch (2) Starter switch
28
3. Horn Switch
Left Handle Bar Controls
1. Headlamp Dimmer Switch
Press the switch (1) upwards for high beam
and downwards for low beam.
2. Turn Signal Switch
Shift the turn signal switch (2) sideways for
right/left indications and leave it to come
back to its normal position on its own.
IMPORTANT : To switch off the turn
signal after completing the turn, gently
push inside as directed on the switch.
Press the switch (3) to operate the horn.
(1) Headlamp dimmer switch
(2) Turn signal switch
(3) Horn switch
1
2
2
3
1
To Next Page
Loading...
