6. Inflate the tyres to their recommended
pressures. Place the scooter on blocks
to raise both tyres off the ground.
7. Cover the scooter (don't use plastic or
other coated materials) and store in an
unheated area, free of dampness with a
mi ni m u m of dai l y te m p er at u re
variation. Do not store the scooter in
direct sunlight.
Crank the engine several times to
distribute the oil.
5. Wash and dry the scooter. Wax all
painted surfaces. Coat chrome plated
parts with rust inhibiting oil.
Reinstall the spark plug and noise
suppressor cap.
4. Remove the battery. Store in an area
protected from freezing temperatures
and direct sunlight. Charge the battery
once a month.
72
4. Perform all Pre-ride Inspection
checks (page 39). Test ride the scooter
at low speeds in a safe riding area
away from traffic.
REMOVAL FROM STORAGE
1. Uncover and clean the scooter.
Change the engine oil if the scooter
has been stored for more than
4 months.
3. Drain any excess aerosol rust -
inhibiting oil from the fuel tank. Fill
the fuel tank with fresh petrol.
2. Check the battery voltage and charge
the battery as required. Install the
battery.
To Next Page
Loading...
