There is a clutch switch provided for the safety
of the rider. The motorcycle cannot be started
by electric starter switch until the clutch lever is
operated when the vehicle is engaged in gear.
6. Clutch Switch
5. Pass Lamp Switch
Press the pass lamp switch to operate the pass
lamp.
To apply choke, pull the lever downwards
towards the rider, as directed on the switch.
Press the switch upwards for High Beam and
downwards for Low Beam.
Press the switch to operate the horn.
1. Headlamp Dimmer Switch
IMPORTANT : To switch off the turn signal
after completing the turn, gently push the
switch inside.
3. Horn Switch
2. Turn Signal Switch
Shift the turn signal switch sideways for
Right/Left indications and leave it to come
back to its normal position on its own.
4. Choke Lever
5
Do not accelerate during starting when the
choke is on.
NOTE
6
RIGHT HANDLEBAR CONTROLS
1
2
1. Headlamp switch
The switch has three position.
marked by red dot.and
14
To Next Page
Loading...
