Follow these guidelines to protect your
motorcycle’s catalytic converter.
air pollution and can impair your engine’s
performance.
î Always use unleaded petrol. Even a small
amount of leaded petrol can contaminate
the catalyst metals, making the catalytic
converter ineffective.
î Keep the engine tuned up.
î Dry the motorcycle by wiping with dry soft cloth.
parts using a cloth or sponge dampened
with a solution of mild detergent and water.
Rub the soiled area gently rinsing it
frequently with fresh water.
Follow the below mentioned steps for washing
the motorcycle.
WASHING THE MOTORCYCLE
î Wet the motorcycle with light water spray.
Avoid directing water to muffler outlets and
electrical parts.
î After cleaning spray water thoroughly.
î Clean the headlamp lens and other plastic
î Do not put water inside the muffler during
washing. It is advisable to put a cover over
the Exhaust pipe to avoid water entering the
muffler.
î Do not use high pressure water (or air). It can
damage certain parts of the motorcycle.
î take all above Our authorised dealership
mentioned precautions like recommended
detergents and usage of muffler caps/plugs
during wash to ensure quality wash.
NOTE
This motorcycle is equipped with a catalytic
converter in the silencer (muffler) to meet the
emission norms.
A defective catalytic converter contributes to
The catalytic converter contains noble metals
that serve as catalyst, promoting chemical
reactions to convert CO and HC in the exhaust
to CO and H O (water vapour).
2 2
CATALYTIC CONVERTER
Further to meet emission standards this
motorcycle is provided with an air suction
valve.
Air suction valve (1) supplies fresh air from
the air filter to the exhaust manifold to convert
carbon monoxide to carbon dioxide. This
reduces the CO % in the vehicles’s exhaust.
AIR SUCTION VALVE
(1) Air suction valve
1
52
To Next Page
Loading...
