HETEC V-Switch quad II User Manual

V-Switch quad II - Installation and Operation Manual
ON SCREEN DISPLAY
15
HOTMOUSE FUNCTION
Use the arrow keys to navigate in the SYSTEM menu to the entry HOTMOUSE and press ENTER/SELECT to
open the HOTMOUSE window.
Hotmouse is an exclusive function that comes with HETEC V-Switch quad II. It works with your standard mouse
or trackball.
To activate Hotmouse operation, navigate to “Enable Hotmouse” and change the setting to “Yes”.
There are two modes of Hotmouse operation: Hotmouse Cursor and Hotmouse Menu.
While Hotmouse Cursor supports only a limited set of operations, Hotmouse Menu allows execution of all
switch operations and PiP settings.
While the Hotmouse function is activated, the active computer can still be operated by keyboard.
For a detailed description of Hotmouse, Hotmouse functionalities, and Hotmouse Menu please see chapter
HOTMOUSE on pages 54ff.
OSD - SYSTEM - HOTMOUSE

HETEC V-Switch quad II Specifications

General

Brand	HETEC
Model	V-Switch quad II
Category	Switch
Language	English