HETEC V-Switch quad II - Recall

V-Switch quad II - Installation and Operation Manual
ON SCREEN DISPLAY
32
BACKUP
Use arrow keys to navigate in the CONFIGURATION menu to the entry BACKUP and press ENTER/SELECT
to open the BACKUP window.
This function saves the current device settings, including the start mode set in MODE START.
RECALL
Use arrow keys to navigate in the CONFIGURATION menu to the entry RECALL and press ENTER/SELECT
to open the RECALL window.
Use this feature to replace the current settings with the last configuration saved using the BACKUP command.
OSD - CONFIGURATION - BACKUP / RECALL
OSD - CONFIGURATION - RECALL
Note:
The EDID configuration will not be saved and can not be recoverd with the RECALL function.