HETEC V-Switch quad II - Osd Usb Device

V-Switch quad II - Installation and Operation Manual
ANNEX
66
Selecting display mode
+ Quad mode
+ Fullscreen mode
+ PiP mode
Selecting active channel in Fullscreen / Quad / PiP mode
+ Computer 1
+ Computer 2
+ Computer 3
+ Computer 4
Open USB device switch menu
Open USB device/port 1 switch menu
Open USB device/port 2 switch menu
Open USB device/port 3 switch menu
Open USB device/port 4 switch menu
Other Commands
+ Open OSD
+ Directly open OSD USB Device 1-4
+ Safe output resolution
+ Directly open OSD PiP menu
(In the background display mode switches to PiP as long as menu is open)
+ Open Hotmouse Menu
KEYBOARD COMMANDS
HK
HK
HK
HK
HK
HK
HK
Q
F
P
1
2
3
4
HK
I
HK
V
HK O
HK
U
HK
F1
HK
F2
HK
F3
HK F4
You can also use hotkey and the arrow keys to switch the active channel.
In Dual mode, you can select the channel on the right using the 1, 2, 3, or 4 keys on the numeric keypad.
Switch the active channel with hotkey and the arrow keys.
In PiP mode, the active channel automatically is displayed as full image.
M
HK