EDID (display of monitor data)
Use arrow keys to navigate in the CONSOLE menu to the entry EDID and press ENTER/SELECT to open the
EDID window.
Use the EDID command to read and display
monitor data (manufacturer, monitor name,
serial number etc.) from the monitor’s
EDID memory.
If VIDEO OUTPUT is set to “auto”, V-Switch
quad II uses the optimum output resolution
offered by the EDID.
EDID (Extended Display Identification Data) is a VESA standard data format that contains basic
information about a monitor and its capabilities. This information is stored in the monitor by the
manufacturer and can be read by V-Switch quad II or graphics card via a monitor cable’s Display
Data Channel (DCC) interface.
OSD - CONSOLE - EDID
To Next Page
Loading...
General