HETEC V-Switch quad II User Manual

V-Switch quad II - Installation and Operation Manual
ANNEX
65
V-Switch quad II supports two types of hotkey: „multiple keys” and „double click”.
By default, V-Switch quad II is set to „multiple keys”.
Use the OSD menu to choose the hotkey type and keys (see page 14).
Multiple keys: Press multiple keys plus command key.
COMMAND = Hotkey and together
The following hotkeys are available for selection:
By Default: HOTKEY = +
Further examples: = + +
= +
=
Double click key: Double click one key (=hotkey) and right after press the command key within 2 seconds.
COMMAND = Hotkey and in sequence
As double click hotkey you can choose one of the following keys:
Examples: HOTKEY =
=
KEYBOARD COMMANDS
HK
Shift
Alt
Win
Ctrl
HK
HK
HK
Ctrl
Win
Alt
Ctrl
Ctrl
Shift
Alt
Command Key
HK
Ctrl
Shift
Alt
Scroll
HK
HK
Scroll Scroll
Ctrl
Command Key
HK
Ctrl
Alt
Note:
In command mode (hotkey is activated) LED flashing on the keyboard.
In double click hotkey mode, pressing an invalid key leaves the command mode.
While OSD is open hotkey =
Ctrl

HETEC V-Switch quad II Specifications

General

Brand	HETEC
Model	V-Switch quad II
Category	Switch
Language	English