Hettich AG, Seestrasse 204a, 8806 Baech, Switzerland Operator_Manual_Rotolavit II_und_Rotolavit II-S_en_rev2.5
Seite 16
6.3 Delivery checklist
1 power-supply, fig. 7.2.4
1 drainage hose ( 14,3 mm) with connector, E4374, fig. 7.2.3
1 fill hose ( 7,1 mm) with connector, E4373, Inlet 1, with intake pipe; for the physiological saline solution,
E4373
1 fill hose ( 7,1 mm) with connector, Inlet 2 (Fluid 2), with intake pipe for a secondary solution
*
1
1 angle piece (plastic), for the drainage hose (for free-running drain), E4394, fig. 7.2.1
1 power-cord
1 battery-cord (with open wires) *
2
1 release-pin, E2287, fig. 7.2.1
1 hex L-key, fig. 7.2.1
The rotor(s) and associated accessories are included in the delivery in the quantity ordered.
*
1
would be delivered only for devices with the optional secondary pump (p/n 1008-02 and
1008-04)
*
2
would be delivered only for devices with the optional car battery DC-input (p/n 1008-03
and 1008-04)
6.4 Disposing of packaging material
Dispose of the packaging material (cardboard, polyurethane foam, tie and plastic bag) in accordance with the
applicable disposal regulations for the respective material in your country. If you have any questions, please
contact your local supplier. We recommend to keep at least one set of the original packaging for transporting
(Chap. 6.5).
6.5 Transportation
Please store the original packaging and use it for transportation. If you have to transport the device and you do
not have the original packaging material anymore, please contact your local supplier. The device and its motor
and rotor must be protected during transportation.
To Next Page
Loading...
Need help?
General
