Hettich AG, Seestrasse 204a, 8806 Baech, Switzerland Operator_Manual_Rotolavit II_und_Rotolavit II-S_en_rev2.5
Seite 56
16.3 Document history
Template, Contents, desc. of preloaded
programs
Correction p/n from accessories,
implementation of Document History
Edit chapter 12, 13, new CE-declaration
and correction of typing errors
Edit chapter 12, new header
Editing formatting and adding the actual
declaration of conformity
Editing of writing and orthographic errors
Editing the address from the
manufacturer
Editing of orthographic errors,
preinstalled programs, notes on safety,
use according to the specifications and
unpacking the centrifuge
Description from the preinstalled
programs, DECANT max value, error 15
tech. data (Noise), chapter password
protection inserted, CE declaration
renewed
Edit chapter 2. Paragraph two, 2.1
software-version, edit chapter 8.1
overview, edit chapter 8.5.2 language,
date and time settings, edit chapter 9.3.3
to 9.3.9 acceleration and braking
presetting, edit chapter 9.4.5 SPIN-
process
Add. of the type 1008-00S, Chap. 2 best
use, Chap. 5 tech. data, Chap. 6.3
Article number and added pictures, ,
Chap. 7.1.1 added, Chap. 9.3, 9.3.10 &
9.3.11 Program and Rotor added for
device 1008-00S, Document history
adapted
Cha. 12.5 and 12.1 fixed typing errors,
revision of the document history
adjusted footer, Date p. 2, Cha. 3 typing
errors fixed, line inserted in chap. 7.2
(orthography), access rights corrected in
Chap. 8.2 and 8.5.2, translation errors
corrected in Chap. 8.3, 8.5 and 8.6.2,
font adapted to CI in Chap. 8.6.1 and the
following chapter relocated to the next
page, numbers implemented in pictures
for better understanding in chap. 9.3,
translation error corrected in chap. 9.4.5
and moved to the following page, added
to the article number table and the
reduction note expanded for better
comprehensibility
To Next Page
Loading...
Need help?
General
