Hettich Rotolavit II User Manual

Hettich AG, Seestrasse 204a, 8806 Baech, Switzerland Operator_Manual_Rotolavit II_und_Rotolavit II-S_en_rev2.5
Seite 23
2
7
1. name of the selected program
2. start program [Login]
3. standby, dark display, reduced power
4. system settings, device settings
5. login / logout
6. select a program
7. open lid
8.1.1 Password protection
Some operating functions are restricted for the "Normal User" level and some can be restricted (R) in the "User
Settings" menu, see chapter 8.6.2. But to do this, the service user password is needed. On delivery the
password for the Advanced User is “1008” (name can be changed), see also the following table:
If you have to be logged in for an action with a password, it is specified in this manual with [Login].
8.2 Start screen
The service user can restrict for the normal user the possibility to start a program.
Function for software rev. 421
Normal user
Advanced user
Service user
Factory user
select program
√ (R)
√
√
√
start program
√ (R)
√
√
√
check function
√ (R)
√
√
√
abort program (stop)
√ (R)
√
√
√
add / edit program
√
√
√
select rotor type
√ (R)
√
√
√
view history
√
√
√
√
reset rotor operating time
√
√
change time / date settings
√
√
√
add / change / delete Adv. User Name
√
√
add / change / delete Adv. User Password
√
√
calibrate filling volume
√
√
change device settings
√
change password
√
√
1
3
4
5
6
7
2

Hettich Rotolavit II Specifications

General

Brand	Hettich
Model	Rotolavit II
Category	Laboratory Equipment
Language	English