Hettich Rotolavit II User Manual

Hettich AG, Seestrasse 204a, 8806 Baech, Switzerland Operator_Manual_Rotolavit II_und_Rotolavit II-S_en_rev2.5
Seite 29
Select a program.
To add a new program
see chapter 8.4.
Each program must be validated by
the user with the custom tube. If the
tube is changed, then the program
must be revalidated!
After selecting the program each
process is displayed.
Check the program and all settings
For each process!
To load the program push:
The now loaded program name
is displayed.
Push „Start program“ to start.

Hettich Rotolavit II Specifications

General

Brand	Hettich
Model	Rotolavit II
Category	Laboratory Equipment
Language	English