In this example, add the process “Spin”:
Push the „SPIN“ symbol
Below the symbol you can choose rotation
speed and the duration of the process.
On the second page you find the
acceleration- and braking speed by clicking:
To accept the SPIN process push:
To add more process push:
By selecting a process, you can switch the
process to the previous process position
To switch left push:
Or after the next process position to the
right push:
To edit a process select it and
Push below:
To save push:
to view processes 6 to 10, 11 to 15 and 16
to 20, push at the right side, backwards at
the left side
To Next Page
Loading...
Need help?
General
