Hettich AG, Seestrasse 204a, 8806 Baech, Switzerland Operator_Manual_Rotolavit II_und_Rotolavit II-S_en_rev2.5
Seite 6
8.5.2 Language, date and time settings 25
8.5.3 Edit password 25
8.6 Service menu 26
8.6.1 Calibration 26
8.6.2 User settings 27
8.6.3 Device settings 27
8.6.4 Network settings 28
9 Programs 28
9.1 Starting the program 28
9.2 Stop a running program 30
9.3 Pre-installed programs 31
9.3.1 flush 31
9.3.2 refill pump 31
9.3.3 wash redcells 3 5ml 3x (wash erythrocytes, 3.5 ml, 3 x) 32
9.3.4 agit and spin 32
9.3.5 decant 32
9.3.6 spin 20sec 3500rpm 32
9.3.7 susp 3 5ml spin 20sec (centrifuge 3.5ml suspension for 20sec) 32
9.3.8 wash 3 5ml 3x and anti (wash 3.5 ml, 3 x, plus antihuman globulin test) 33
9.3.9 wash white cells Tspot (wash leukocytes, Tspot) 33
9.3.10 cell recovery (only device type 1008-00S) 33
9.2.11 immunophenotyping (only device type 1008-00S) 33
9.4 Process descriptions 34
9.4.1 Principle 34
9.4.2 FILL 1 process 34
9.4.3 FILL 2 process 34
9.4.4 DOWN process 35
9.4.5 SPIN process 35
9.4.6 DECANT process 36
9.4.7 AGIT process 36
9.4.8 LOOP process 37
9.4.9 CHECK process 37
9.5 Add a new program 38
10 Adjusting 40
10.1 Entering the rotor type 40
10.2 Calibrating the filling volume 40
10.3 Audible signal 41
To Next Page
Loading...
Need help?
General
