Heyer LUVAR A - Page 74

Appendix
Page 72
heyer_LUVAR_UserManual_EN-3_CRev-1
Interference
emission
IEC 60601 test
level
Compliance level Electromagnetic envi-
ronment - guidelines
Electrostatic
discharge (ESD)
according to
IEC61000-4-2
± 8 kV contact
discharge
± 15 kV air
discharge
± 8 kV contact dis-
charge
± 15 kV air discharge
Floors should be
made of wood,
concrete or ceramic
tiles. If floors are cov-
ered with synthetic
material, the relative
humidity must be at
least 30%.
Radiated RF
disturbance
variable ac-
cording to
IEC 61000-4-3
10V/m
80MHz –
2.7GHz
80 % AM at
1kHz
10 V/m Portable and mobile
RF communications
equipment (including
the lines and anten-
nas) should not be
used at a distance
from the device less
than the recommend-
ed protective dis-
tance of 0.3 m.
Interference may
occur in the vicinity
of equipment marked
with the following
symbol:
27 V/m
385 MHz PM:
18 Hz
27 V/m
28 V/m
450 MHz
FM ± 5 Hz:
1kHz sine
28 V/m