Page 4-2 December 2016
Printer Preferences PLT-01668, Version: 1.2
Field Description
Card Size Select CR-80 or CR-79.
Measurement units Select inches or mm (millimeters).
Print Width Displays width dimension of the card.
Print Length Displays length dimension of the card.
Card Thickness (mil) Select the card thickness in mils.
Orientation Select Portrait for vertical orientation or Landscape for horizontal orientation.
Copies Select the number of copies to print using Test Print.
Diagnostics Click Diagnostics to access the Workbench 3 utility. See the Workbench 3 User
Guide or Workbench 3 Help facility for more information.
See Section 4.1.1: Toolbox Window
Test Print Click Test Print to send one or more self-test prints to the printer.
Toolbox Click the Toolbox button for access to the following Toolbox options:
• Configuration
• Calibrate Ribbon
• Clean Printer
• Advanced Settings
About
To Next Page
Loading...
