December 2016 Page 1-3
PLT-01668, Version: 1.2 Specifications
1.2 Safety Messages
1.2.1 Safety Messages - United States
Symbol Critical Instructions for Safety Purposes
Danger: Failure to follow these guidelines results in personal injury or death.
To prevent personal injury or death:
• Reference the following safety messages before performing an operation.
• Always remove the power cord prior to performing repair procedures, unless
otherwise specified.
• Ensure only qualified personnel perform these procedures.
ESD: This device is electro statically sensitive. You may damage the device if exposing it to
static electricity discharges.
To prevent damage:
• Reference the following safety messages before performing an operation.
• Observe all established Electrostatic Discharge (ESD) procedures while handling
cables in or near the Circuit Board and Printhead Assemblies.
• Always wear an appropriate personal grounding device.
• Always remove the Ribbon and Cards from the Printer before making any repairs,
unless otherwise specified.
• Remove jewelry and thoroughly clean hands before working on the Printer.
Caution: This symbol warns of an electrical hazard that could result in personal injury or death.
Caution: For safety purposes, do not use Ethernet for a direct connection outside of the building.
To Next Page
Loading...
Need help?
General