Page 4-8 December 2016
Printer Preferences PLT-01668, Version: 1.2
4.1.1.4.1 Cleaning Kit
As with any electronic device, internal components of the printer, such as the printhead,
may be damaged if exposed to static electrical discharges. To avoid potential damage,
always wear an appropriate personal grounding device, such as a wrist strap (with
integral resistor) connected to an ESD ground.
This Cleaning Kit provides you with the specialized cleaning supplies and the required cleaning
procedures for you to maintain your card printer/encoder. The following cleaning procedures will
require less than 10 minutes.
Description Supplies (pictured)
Four (4) Printhead Cleaning Swabs are pre-moistened
with 99.99% isopropyl alcohol for cleaning your
printer’s printhead.
Three (3) Alcohol Cards are pre-moistened with
99.99% isopropyl alcohol for cleaning your printer’s
platen, and card feed rollers.
Ten (10) Cleaning Cards are provided with adhesive
backing for cleaning your printer’s platen and card feed
rollers.
To Next Page
Loading...
Need help?
General