Hikmicro ALPEX LRF 4K Series User Manual

Digital Day & Night Vision Scope User Manual
10
1. Enable auto screen off.
Hold the wheel to show the menu.
Go to Advanced Settings, and rotate the wheel to select
.
Press the wheel to enable auto screen off.
Hold the wheel to save settings and exit.
2. You can do one of the following methods to enter the standby mode
when the display is turned on:
 Tilt the device downwards more than 70°.
 Rotate the device horizontally more than 75°.
 Keep the device still and do not move it for 5 minutes.
3. You can do one of the following methods to wake up the device when
the display is turned off:
 Tilt the device downwards from 0° to 60° or upwards .
 Rotate the device horizontally from 0° to 75°.
 Press to wake up the device.
2.7 Menu Description
In the live view interface, hold the wheel to show the menu.
Figure 2-14 Menu Description
2.8 App Connection
Connect the device to the HIKMICRO Sight app via hotspot, then you can
capture picture, record video, or configure parameters on your phone.
Steps

Hikmicro ALPEX LRF 4K Series Specifications

General

Frame Rate	50 Hz
Laser Rangefinder	Yes
IP Rating	IP67
Sensor Resolution	384 × 288
Detection Range	1800m
Display	0.39 inch, OLED
Laser Rangefinder Range	1000 m
Battery Type	Rechargeable Li-ion Battery
Weight	Approx. 980 g
Operating Temperature	-30°C to 55°C
Storage Temperature	-30°C to 60°C
Objective Lens	50 mm
Battery Life	8 hours