Digital Day & Night Vision Scope User Manual
4
2 Preparation
2.1 Cable Connection
Connect the device and power adaptor with a type-C cable to power on the
device. Alternatively, connect the device and PC to export files.
Figure 2-1 Cable Connection
Note
Charge the device for more than 6 hours before first use.
2.2 Install Battery
Remove the external battery if the device is not used for a long time.
The external rechargeable battery type is 18650, and the battery size
should be 19 mm × 70 mm. The rated voltage is 3.6 V, and the battery
capacity is 3200 mAh.
The built-in battery type is rechargeable lithium-ion battery, and the
battery size should be 23 mm × 67 mm. The rated voltage is 3.635 V,
and the battery capacity is 3350 mAh.
Insert the batteries into the battery compartment.
Steps
1. Turn the battery cover counterclockwise to loosen it.
To Next Page
Loading...
