EasyManuals Logo

Hikmicro ALPEX LRF 4K Series User Manual

Hikmicro ALPEX LRF 4K Series
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Digital Day & Night Vision Scope User Manual
15
Note
When focusing, do not touch the surface of lens to avoid smearing the
lens.
3.3 Adjust Aperture
Steps
1. Power on the device.
2. Hold the device and make sure the eyepiece covers your eye.
3. Rotate the aperture adjustment ring to adjust aperture to accommodate
various light conditions.
Figure 3-3 Adjust Aperture
3.4 Adjust Brightness
You can adjust the display brightness of the screen in the menu.
Steps
1. Hold the wheel to show the menu.
2. Rotate the wheel to select and press the wheel to confirm.
3. Rotate the wheel to adjust brightness.
4. Hold the wheel to save settings and exit.
3.5 Adjust Contrast
Steps
1. Hold the wheel to show the menu.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hikmicro ALPEX LRF 4K Series and is the answer not in the manual?

Hikmicro ALPEX LRF 4K Series Specifications

General IconGeneral
Frame Rate50 Hz
Laser RangefinderYes
IP RatingIP67
Sensor Resolution384 × 288
Detection Range1800m
Display0.39 inch, OLED
Laser Rangefinder Range1000 m
Battery TypeRechargeable Li-ion Battery
WeightApprox. 980 g
Operating Temperature-30°C to 55°C
Storage Temperature-30°C to 60°C
Objective Lens50 mm
Battery Life8 hours

Related product manuals