Digital Day & Night Vision Scope User Manual
31
Figure 7-2 Start Recording
The left image displays the information of recording time.
2. Hold again to stop recording.
After you enable this function and select the prerecording time, the device
can automatically start recording the 7, 10 or 15 seconds before the recoil-
activation and end recording the 7, 10 or 15 seconds after the recoil-
activation.
Steps
1. Hold the wheel to show the menu.
2. Go to Advanced Settings, and rotate the wheel to select .
3. Press the wheel to enter the setting interface. Rotate the wheel to
switch the prerecording time. 7 s, 10 s, and 15 s are selectable. You can
also select OFF to turn off the function.
4. Hold the wheel to save settings and exit.
Captured images and recorded videos are automatically stored in the
device, and you can view the files in local albums.
Steps
1. Hold the wheel to show the menu.
2. Rotate the wheel to select . Press the wheel to enter the album.
To Next Page
Loading...
