Digital Day & Night Vision Scope User Manual
26
5 Measure Distance
The device can detect the distance between the target and the observation
position with laser.
Before You Start
When measuring the distance, keep the hand and the position steady.
Otherwise, the accuracy may be affected.
Steps
1. Hold the wheel to show the menu.
2. Go to Advanced Settings, and rotate the wheel to select .
Press the wheel to enter the setting interface.
3. Rotate the wheel to select a continuous laser ranging mode. Press the
wheel to confirm.
Note
The device can measure the distance continuously, and the measurement
duration can be selected. The measurement result will be refreshed every
1 s.
4. Hold the wheel to save the setting and return to the live view interface.
5. Aim the cursor at the target and press to measure the target
distance.
Note
Press in the live view interface to turn off laser ranging.
Laser ranging cannot be enabled when device battery is low.
Result
The right top of the image displays the distance measurement result.
Caution
The laser radiation emitted from the device can cause eye injuries, burning
of skin or inflammable substances. Before enabling the laser ranging
function, make sure no human or inflammable substances are in front of
the laser lens.
To Next Page
Loading...
Need help?
General
