Hikmicro ALPEX LRF 4K Series - Set Measurement Units; View Device Information; Restore Device to Defaults

Digital Day & Night Vision Scope User Manual
36
2. Go to Advanced Settings, and select General Settings.
3. Rotate the wheel to select , and press the wheel to enter the
configuration interface.
4. Rotate the wheel to select the language as required, and press the
wheel to confirm.
5. Hold the wheel to save settings and exit.
8.4 Set Unit
You can switch the unit for distance measurement.
Steps
1. Hold the wheel to show the menu.
2. Go to Advanced Settings, and select General Settings.
3. Rotate the wheel to select , and press the wheel to enter the
configuration interface.
4. Rotate the wheel to select the unit as required.
5. Hold the wheel to save settings and exit.
8.5 View Device Information
Steps
1. Hold the wheel to show the menu.
2. Go to Advanced Settings, and select General Settings.
3. Rotate the wheel to select , and press the wheel to confirm. You
can view the device information such as version and serial No.
4. Hold the wheel to save settings and exit.
8.6 Restore Device
Steps
1. Hold the wheel to show the menu.