Hikmicro ALPEX LRF 4K Series User Manual

Digital Day & Night Vision Scope User Manual
18
Figure 3-6 PIP
Note
If the PIP function is enabled, only the PIP view zooms when adjusting the
digital zoom ratio.
3.9 Adjust Digital Zoom
In the live view interface, rotate the wheel to adjust digital zoom of the
device.
Steps
1. Hold the wheel to show the menu.
2. Go to Advanced Settings, and rotate the wheel to select .
3. Press the wheel to enter the setting interface, and rotate the wheel to
select a zoom mode.
 Multiple: The digital zoom ratio can be set to 1×, 2×, 4×, and 8×.
 Continuous: The digital zoom ratio can be set from 1.0× to 8.0×
continuously.
4. Hold the wheel to save and exit.
5. In the live view interface, rotate the wheel to switch the digital zoom of
the device.
Note
When switching the digital zoom ratio, the left interface displays the actual
magnification (Actual Magnification = Lens Optical Magnification × Digital
Zoom Ratio). For example, the lens optical magnification is 2.8× and the
digital zoom ratio is 2×, and the actual magnification is 5.6×.

Hikmicro ALPEX LRF 4K Series Specifications

General

Frame Rate	50 Hz
Laser Rangefinder	Yes
IP Rating	IP67
Sensor Resolution	384 × 288
Detection Range	1800m
Display	0.39 inch, OLED
Laser Rangefinder Range	1000 m
Battery Type	Rechargeable Li-ion Battery
Weight	Approx. 980 g
Operating Temperature	-30°C to 55°C
Storage Temperature	-30°C to 60°C
Objective Lens	50 mm
Battery Life	8 hours