Digital Day & Night Vision Scope User Manual
46
Safety Instruction
These instructions are intended to ensure that user can use the product
correctly to avoid danger or property loss. Please read all the safety
information carefully before using.
Transportation
●
Keep the device in original or similar packaging while transporting it.
●
Keep all wrappers after unpacking them for future use. In case of any
failure occurred, you need to return the device to the factory with the
original wrapper. Transportation without the original wrapper may result
in damage on the device and the company shall not take any
responsibilities.
●
Do not drop the product or subject it to physical shock. Keep the device
away from magnetic interference.
Power Supply
●
The input voltage for the device should meet the Limited Power Source
(5 VDC, 2 A) according to the IEC61010-1 standard. Please refer to
actual products and technical specifications for detailed information.
●
Make sure the plug is properly connected to the power socket.
●
DO NOT connect multiple devices to one power adapter, to avoid over-
heating or fire hazards caused by overload.
●
The power source should meet limited power source or PS2
requirements according to IEC 62368-1 standard.
Battery
●
The external rechargeable battery type is 18650, and the battery size
should be 19 mm × 70 mm. The rated voltage is 3.6 VDC, and the battery
capacity is 3200 mAh.
●
The built-in battery type is rechargeable lithium-ion battery, and the
battery size should be 23 mm × 67 mm. The rated voltage is 3.635 V,
and the battery capacity is 3350 mAh.
●
For long-term storage of the battery, make sure it is fully charged every
half year to ensure the battery quality. Otherwise, damage may occur.
●
CAUTION: Risk of explosion if the battery is replaced by an incorrect
type.
●
The built-in battery cannot be dismantled. Please contact the
manufacture for repair if necessary.
To Next Page
Loading...
Need help?
General
