EasyManuals Logo

Hikmicro ALPEX LRF 4K Series User Manual

Hikmicro ALPEX LRF 4K Series
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
Digital Day & Night Vision Scope User Manual
48
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the
power, unplug the power cable, and contact the service center.
Laser
When any laser equipment is in use, make sure that the
device lens is not exposed to the laser beam, or it may
burn out. The laser radiation emitted from the device can
cause eye injuries, burning of skin or inflammable substances. Before
enabling the laser ranging function, make sure no human or inflammable
substances are in front of the laser lens. Do not place the device where
minors can fetch it. The wavelength is 905 nm, and the max. power output
is less than 1.15 mW. According to IEC 60825-1:2014, this laser product is
classified as Class 1 laser product.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,
Binjiang District, Hangzhou, Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hikmicro ALPEX LRF 4K Series and is the answer not in the manual?

Hikmicro ALPEX LRF 4K Series Specifications

General IconGeneral
Frame Rate50 Hz
Laser RangefinderYes
IP RatingIP67
Sensor Resolution384 × 288
Detection Range1800m
Display0.39 inch, OLED
Laser Rangefinder Range1000 m
Battery TypeRechargeable Li-ion Battery
WeightApprox. 980 g
Operating Temperature-30°C to 55°C
Storage Temperature-30°C to 60°C
Objective Lens50 mm
Battery Life8 hours

Related product manuals