HIKVISION DS-2TD2608-2/QA/FP User Manual

Detecon Mode Mode Descripon Conguraon Descripon
Source Detecon and Smoke
Detecon.
Specied Fire Source The system alarms when
device is triggered only by Fire
Source Detecon.
Set Fire Source Detecon, see
step 4.
Specied Smoke The system alarms when
device is triggered only by
Smoke Detecon.
Set Smoke Detecon, see step
4.
Note
Fire or Smoke, Fire and Smoke and Double Conrm are mutually exclusive with temperature
measurement funcon.
4.
Set Fire Source Detecon and Smoke Detecon.
Detecon Funcon Parameter Descripon
Fire Source Detecon Alarm Interval
Set the alarm interval between two alarms.
The smaller the value is, the higher the
detecon frequency is.
Picture Quality
Set quality of the alarm capture. The beer
the quality is, the sharper the image is, and
the larger the le size is.
Fire Source Detecon
Dynamic Fire detects the dynamic re
source and Smoking Mode detects the
smoking behavior in the scene.
Note
Smoking Mode is not supported in Fire
and Smoke and Double Conrm.
Display Fire Source Frame on Stream
Display a red frame around the re source
on stream when
re occurs.
Sensivity
Thermal Opcal Bi-spectrum Network Camera User Manual
27

HIKVISION DS-2TD2608-2/QA/FP Specifications

General

Brand	HIKVISION
Model	DS-2TD2608-2/QA/FP
Category	Security Camera
Language	English