HIKVISION DS-2TD2608-2/QA/FP

Chapter 4 VCA Resource
VCA resource is a collecon of smart funcons supported by the device.
4.1 Temperature Measurement
When you enable this funcon, the device measures the actual temperature of the scene. It alarms
when temperature exceeds the temperature threshold value.
4.1.1
Noce
This part introduces the noces of conguring temperature measurement funcon.
●
The target surface should be as vercal to the opcal axis as possible. It is recommended that
the angle of oblique image plane should be less than 45°.
●
The target image pixels should be more than 5 × 5.
●
If mulple presets will be taken for temperature measurement, it is recommended to set the
patrol
me above 20 s.
●
Please select line thermography or area thermography for a certain area temperature
measurement. The point thermography is not recommended in case of
deviaon occurred
during device movement to aect the accuracy of temperature measurement.
4.1.2 Thermography
Conguraon Flow Chart
This part introduces the process of conguring temperature measurement.
Thermal Opcal Bi-spectrum Network Camera User Manual
16