HIKVISION DS-2TD2608-2/QA/FP User Manual

Figure 6-5 Defog
6.2.11 Gray Scale
This secon intrduces the gray scale funcon in opcal channel.
You can choose the range of the grey scale as [0-255] or [16-235].
6.2.12 Set
Palee
You can select the palee mode to display the thermal grayscale image to colored image.
Steps
1.
Go to Conguraon → Image → Display Sengs .
2.
Select the thermal channel.
3.
Select a
palee mode in Image Enhancement according to your need.
Result
The live view displays the image with
palee.
6.2.13 DDE
Digital Detail Enhancement is used to adjust the details of the image. OFF and Normal modes are
selectable.
OFF
Disable this
funcon.
Normal
Set the DDE level to control the details of the image. The higher the level is, the more details
shows, but the higher the noise is.
Thermal Opcal Bi-spectrum Network Camera User Manual
43

HIKVISION DS-2TD2608-2/QA/FP Specifications

General

Brand	HIKVISION
Model	DS-2TD2608-2/QA/FP
Category	Security Camera
Language	English