HIKVISION DS-2TD2608-2/QA/FP

Some camera models support CVBS, SDI, or HDMI output. Set the local output ON or OFF
according to the actual device.This is the start of your concept.
6.3 OSD
You can customize OSD (On-screen Display) informaon such as device name, me/date, font,
color, and text overlay displayed on video stream.
Go to OSD
seng page: Conguraon → Image → OSD Sengs . Set the corresponding
parameters, and click Save to take eect.
Select a channel.
Displayed
Informaon
Check to display camera name, date, week, laser ranging info, image center on the screen. You can
set the
me and date formats.
Text Overlay
Set customized overlay text on image.
OSD Parameters
Set OSD parameters, such as Display Mode, OSD Size, and Font Color.
6.4 VCA Rule Display
Sengs
The VCA rule display refers to the funcon that you can customize the displayed overlay
informaon of the VCA rule, which includes the font size and line and frame color.
You can go to
Conguraon → Image → VCA Rule Display to select the desired font size, and set
the line and frame color.
6.5 Set Privacy Mask
The funcon blocks certain areas in the live view to protect privacy. No maer how the device
moves, the blocked scene will never be seen.
Steps
1.
Go to privacy mask
seng page: Conguraon → Image → Privacy Mask .
2.
Select the channel No.
3.
Check Enable Privacy Mask.
4.
Click Draw Area. Drag the mouse in the live view to draw a closed area.
Drag the corners of the area
Adjust the size of the area.
Drag the area Adjust the posion of the area.
Thermal Opcal Bi-spectrum Network Camera User Manual
45