HIKVISION DS-2TD2608-2/QA/FP

Chapter 6 Video and Image Sengs
This part introduces the conguraon of video/audio and image related parameters.
6.1 Video Sengs
This part introduces the sengs of video parameters, such as, stream type, video encoding, and
resoluon.
Go to seng page: Conguraon → Video/Audio → Video .
Note
For device with mulple camera channels, select a channel before other sengs.
6.1.1 Stream Type
For device supports more than one stream, you can specify parameters for each stream type.
Main Stream
The stream stands for the best stream performance the device supports. It usually oers the
best
resoluon and frame rate the device can do. But high resoluon and frame rate usually
mean larger storage space and higher bandwidth requirements in transmission.
Sub Stream
The stream usually oers comparavely low resoluon opons, which consumes less bandwidth
and storage space.
6.1.2 Video Type
Select the content that should be contained in the stream.
Video Stream
Only video content is contained in the stream.
6.1.3
Resoluon
Select video resoluon according to actual needs. Higher resoluon requires higher bandwidth and
storage.
Thermal Opcal Bi-spectrum Network Camera User Manual
34