Network Video Recorder User Manual
127
Step 3 Edit the alarm name.
Step 4 Select the dwell time (the alarm duration) from 5s to 600s, or Manually Clear.
Manually Clear: You should manually clear the alarm when the alarm occurs. Refer to Chapter
11.9 Trigger or Clear Alarm Output Manually for detailed instructions.
Step 5 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Figure 11-8 Alarm Output
Step 1 (Optional) Click Copy to copy the same settings to other alarm output (s).
To Next Page
Loading...
