HIKVISION DS-9616NI-I8 User Manual

Network Video Recorder User Manual
61
4.3 Configure the Image Parameters
Purpose
You can customize the image parameters including the brightness, contrast, and saturation for the
Live View and recording effect.
Step 1 Go to Camera>Display > Image Settings.
Step 2 Select a camera from the drop-down list.
Step 3 Adjust the slider or click on the up/down arrow to set the value of the brightness, contrast, or
saturation.
Step 4 Click Apply.
4.4 Configure the Day/Night Switch
The camera can be set to day, night, or auto switch mode according to the surrounding
illumination conditions.
Step 1 Go to Camera>Display > Day/Night Switch.
Step 2 Select the camera from the drop-down list.
Step 3 Set the day/night switch mode to Day, Night, Auto, or Auto-Switch.
Auto: The camera automatically switches between day mode and night mode according to the
illumination.
The sensitivity ranges from 0 to 7, and higher sensitivity more easily triggers the mode switch.
The switch time refers to the interval time between the day/night switch. You can set it from 5 sec
to 120 sec.
Auto-Switch: The camera switches the day mode and the night mode according to the start time
and end time you set.
Step 4 Click the Apply.
4.5 Configure Other Camera Parameters
For a connected camera, you can configure the camera parameters including the exposure mode,
backlight and image enhancement.
Step 1 Go to Camera>Display.
Step 2 Select a camera from the drop-down list.
Step 3 Configure the camera parameters.

HIKVISION DS-9616NI-I8 Specifications

General

Sequence mode	Yes
Internal memory	4096 MB
Number of users	128 user(s)
Maximum resolution	3840 x 2160 pixels
Alarm input channels	16
Internal memory type	DDR4
Throughput data rate	256 Mbit/s
Video input channels	16 channels
Alarm output channels	4
Supported resolutions	3840 x 2160, 2560 x 1440, 1920 x 1080, 1600 x1200, 1280 x 1024, 1280 x 720, 1024 x 768
Video formats supported	H.264, H.264+, H.265, MPEG4
Analog signal format system	NTSC, PAL
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
RAID levels	0, 1, 5, 10
HDD capacity	8000 GB
HDD interface	Serial ATA
Maximum storage capacity	- TB
Number of HDDs installed	-
Number of HDDs supported	8
Total installed storage capacity	16000 GB
Product color	Black
Rack capacity	2U
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	200 W

Weight and Dimensions

Depth	470 mm
Width	445 mm
Height	90 mm