EasyManuals Logo

HIKVISION DS-9616NI-I8 User Manual

HIKVISION DS-9616NI-I8
213 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #166 background imageLoading...
Page #166 background image
Network Video Recorder User Manual
165
Figure 15-11 E-mail Settings
Step 2 Configure the following e-mail settings.
Enable Server Authentication: Check to enable the function if the SMTP server requires user
authentication, and enter the user name and password accordingly.
SMTP Server: IP address of SMTP Server or host name (e.g., smtp.263xmail.com).
SMTP Port: The default TCP/IP port used for SMTP is 25.
Enable SSL/TLS: Check to enable SSL/TLS if required by the SMTP server.
Sender: The senders name.
Sender's Address: The sender's Address.
Select Receivers: Select the receiver. Up to 3 receivers can be configured.
Receiver: The receivers name.
Receiver's Address: The e-mail address of the user to be notified.
Enable Attached Picture: Check to send e-mail with attached alarm images. The interval is the
time between sending two subsequent alarm images.
Step 3 Click Apply.
Step 4 (Optional) Click Test to send a test e-mail.
15.8 Configure Ports
You can configure different types of ports to enable relevant functions.

Table of Contents

Other manuals for HIKVISION DS-9616NI-I8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-9616NI-I8 and is the answer not in the manual?

HIKVISION DS-9616NI-I8 Specifications

General IconGeneral
Sequence modeYes
Internal memory4096 MB
Number of users128 user(s)
Maximum resolution3840 x 2160 pixels
Alarm input channels16
Internal memory typeDDR4
Throughput data rate256 Mbit/s
Video input channels16 channels
Alarm output channels4
Supported resolutions3840 x 2160, 2560 x 1440, 1920 x 1080, 1600 x1200, 1280 x 1024, 1280 x 720, 1024 x 768
Video formats supportedH.264, H.264+, H.265, MPEG4
Analog signal format systemNTSC, PAL
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity1
RAID levels0, 1, 5, 10
HDD capacity8000 GB
HDD interfaceSerial ATA
Maximum storage capacity- TB
Number of HDDs installed-
Number of HDDs supported8
Total installed storage capacity16000 GB
Product colorBlack
Rack capacity2U
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)200 W
Weight and Dimensions IconWeight and Dimensions
Depth470 mm
Width445 mm
Height90 mm

Related product manuals