HIKVISION DS-9616NI-I8 User Manual

Network Video Recorder User Manual
144
1) Select the Exception Detection tab.
2) Check Audio Loss Exception, Sudden Increase of Sound Intensity Detection, and/or Sudden
Decrease of Sound Intensity Detection.
Audio Loss Exception: Detects a steep sound rise in the surveillance scene. You can set
the detection sensitivity and threshold for steep sound rise by configuring its Sensitivity
and Sound Intensity Threshold.
Sensitivity: The smaller the value, the more severe the change must be to trigger the
detection. Range [1-100].
Sound Intensity Threshold: It can filter the sound in the environment. The louder the
environment sound, the higher the value should be. Adjust it according to the
environment. Range [1-100].
Sudden Decrease of Sound Intensity Detection: Detects a steep sound drop in the
surveillance scene. You need set the detection sensitivity [1-100].
Step 6 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 7 Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Step 8 Click Apply.
12.10 Sudden Scene Change Detection
Purpose
Scene change detection detects the change of the surveillance environment affected by external
factors, such as the intentional rotation of the camera.
Step 1 Go to System > Event > Smart Event.
Step 2 Click Sudden Scene Change.

HIKVISION DS-9616NI-I8 Specifications

General

Sequence mode	Yes
Internal memory	4096 MB
Number of users	128 user(s)
Maximum resolution	3840 x 2160 pixels
Alarm input channels	16
Internal memory type	DDR4
Throughput data rate	256 Mbit/s
Video input channels	16 channels
Alarm output channels	4
Supported resolutions	3840 x 2160, 2560 x 1440, 1920 x 1080, 1600 x1200, 1280 x 1024, 1280 x 720, 1024 x 768
Video formats supported	H.264, H.264+, H.265, MPEG4
Analog signal format system	NTSC, PAL
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
RAID levels	0, 1, 5, 10
HDD capacity	8000 GB
HDD interface	Serial ATA
Maximum storage capacity	- TB
Number of HDDs installed	-
Number of HDDs supported	8
Total installed storage capacity	16000 GB
Product color	Black
Rack capacity	2U
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	200 W

Weight and Dimensions

Depth	470 mm
Width	445 mm
Height	90 mm