HIKVISION DS-A81024S/192 User Manual

Storage System User Manual
50
Select Encoding Devices
6. Select Date on which you want to set schedule.
Date
7. In Record mode, to schedule an all-day recording, check Whole-day Video.
Or you can select the one or more time segments to set start time and end time.
Up to 8 periods can be configured for each day. And the time periods can’t be overlapped with each other.
Record
8. Optionally, you can select one or more Dispatch options.
 Disabled by Default: If selected, schedule status is Stopped. And encoding device would not start recording.
Other Schedule options wouldn’t take effective.
 Not execute record dispatch: If selected, encoding device wouldn’t start recording. Other Schedule options
wouldn’t take effective.
 Copy back: If selected and uploading schedule exists, the camera video would upload to CVR. For details of
configuring uploading schedule, refer to chapter 6.5.2.3 Add Upload.
 Disable alarm pre-record: Pre-record refers to the time you set to record before the scheduled time or event.
If selected, pre-record is turned off.
 Disable alarm arming: If selected, when encoding device is error, CVR wouldn’t alarm.
 Lock: If selected, you need to set locking time as a specified duration or keep locking. During locking time,
videos wouldn’t be overlapped. Locking time must be longer than duration time.

HIKVISION DS-A81024S/192 Specifications

General

Brand	HIKVISION
Model	DS-A81024S/192
Category	Storage
Language	English