Access Control Terminal·User Manual
80
Steps:
1. Click Multiple Authentication tab and select a group in the access controller from the list on the left.
2. Edit the role name, the card swiping times and the expiry date. And click Add to add the group members.
3. Check the target members and click Add to add the selected members. The added members will be displayed in the group
member list.
Or select the members and click Delete to delete the members.
4. Click Save to save the configuration.
5. Click the access controller which contains the configured role and click Add.
6. Configure the template, the certificate type, the offline authentication and the certification group. And click Add button in
the middle to add the role from the left list to the right one.
Or select the target role in the right list and click Delete to delete the selected role.
Or select the target role and click Move Up or Move Down to change the role swiping card order.
To Next Page
Loading...
