Access Control Terminal·User Manual
84
010-Open, 011-Closed,
020-Normally open,
021-Normally Closed,
120-Disarm, 121-Arm
1-all objects with
permission, 2-single
operation
Starts from 1
(corresponding to different
doors or arming regions
according to commands)
Command#2#Operation
Object#
Password Authentication
Purpose:
You can open the door by inputting the password only after finishing the operation of password authentication.
Steps:
1. Click Password Authentication tab and select a host.
2. Click the Add button to enter card adding interface.
3. Check the checkbox of the corresponding card, and click the button to pop up the password setting dialogue box.
4. Input the card password.
To Next Page
Loading...
Need help?
General
