HIKVISION DS-K1T320 Series - Page 106

Tampering Detecon
Enable the an-tamper detecon for the card reader.
Card No. Reversing
The read card No. will be in reverse sequence aer enabling the funcon.
Set Door Parameters
Click Conguraon → Access Control → Door Parameters .
Figure 14-9 Door Parameters Sengs Page
Click Sa
ve to save the sengs aer the conguraon.
Door No.
Select the device corresponded door No.
Name
You can create a name for the door.
Open
Duraon
Set the door unlocking duraon. If the door is not opened for the set me, the door will be
locked.
Door Open Timeout Alarm
An alarm will be triggered if the door has not been closed within the congured me duraon.
Door Contact
You can set the door contact as Remain Open or Remain Closed according to your actual needs.
By default, it is Remain Closed.
DS-K1T320 Series Face Recoginon Terminal User Manual
91