HIKVISION DS-K1T320 Series - Page 110

schedule repeats, the shi type, break sengs, and the card swiping rule.) to the shi group to
dene the aendance parameters for the persons in the shi group.
Disable Aendance Mode via Web
Disable the aendance mode and the system will not display the aendance status on the inial
page.
Steps
1.
Click Conguraon → T&A Status to enter the sengs page.
2.
Set the Time and Aendance.
Result
You will not view or congure the aendance status on the inial page. And the system will follow
the aendance rule that congured on the plaorm.
Time Sengs
Steps
1.
Click Conguraon → T&A St
atus to enter the sengs page.
2.
Select Schedule Template.
3.
Drag mouse to set the schedule.
Note
Set the schedule from Monday to Sunday according to the actual needs.
4.
Y
ou can enable On/o Work,Break Overme according to your actual needs and set the custom
name.
5.
Oponal: Select a meline and click Delete. Or click Delete All to clear the sengs.
6.
Click Sa
ve.
Set Manual Aendance via Web
Set the aendance mode as manual, and you should select a status manually when you take
aendance.
Before You Start
Add at least one user, and set the user's authencaon mode. For details, see User Managemen
t.
Steps
1.
Click Conguraon → T&A Status to enter the sengs page.
2.
Set the Aendance Mode as Manual.
3.
Enable the Aendance Status Required and se
t the aendance status lasts duraon.
4.
Enable a group of aendance status.
DS-K1T320 Series Face Recoginon Terminal User Manual
95