HIKVISION DS-K1T981 Series - 3.3 Surface Mounting

Figure 3-9 Secure Device
9. Aer
installaon, for the proper use of the device (outdoor use), sck the protecon lm (parts
of models supplied) on the screen.
3.4 Mount With Bracket
3.4.1 Preparaon before Mounng with Bracket
Steps
1. Drill holes on the turnsle's surface according to the gure displayed below. And install water-
proof nut.
Note
Solder aer pressing rivets to avoid water from entering.
DS-K1T981 Series Access Control Terminal User Manual
12