HIKVISION DS-K1T981 Series

2. Check Enable DST.
3. Set the DST start me, end me and bias me.
4. Click Save to save the sengs.
8.5.5 View Open Source Soware License
Go to Conguraon → System → System Sengs → About , and click View Licenses to view the
device license.
8.5.6 Upgrade and Maintenance
Reboot device, restore device parameters, and upgrade device version.
Reboot Device
Click Conguraon → System → Maintenance → Upgrade & Maintenance .
Figure 8-4 Upgrade and Maintenance Page
Click R
eboot to start reboot the device.
Restore Parameters
Click Conguraon → System → Maintenance → Upgrade & Maintenance .
Restore All
All parameters will be restored to the factory sengs. You should acvate the device before
usage.
DS-K1T981 Series Access Control Terminal User Manual
77